IJTC2008-71099 AN EXPERIMENTAL INVESTIGATION ON FRICTION COEFFICIENT IN PLAIN JOURNAL BEARINGS DURING START-UP

ABSTRACT The start-up friction coefficient is a parameter which is very useful for engineers who design hydrodynamic bearings

Production of n-propyl acetate by reactive distillation : experimental and theoretical study

First steps of the development of a catalytic reactive distillation process for the production of n-propyl acetate based on experiments and simulations are proposed. The kinetics for homogeneously (sulphuric acid) and heterogeneously (Amberlyst 15) catalysed reaction were investigated and the constants for a pseudo-homogeneous model are presented. Pilot plant experiments were performed using a homogeneous strong acid catalyst in a packed column. A top-column decanter is used to withdraw the aqueous phase and to reflux the organic phase. Simulation results are in good agreement with experimental data. Thermodynamics nonidealities are taken into account using VLE and LLE NRTL interaction parameters. Alcohol conversion and n-propyl acetate purity may be dramatically increased just by adding to the pilot plant a stripping section in an additional column: six different configurations are identified to achieve such a production. The startup is studied in order to determine the best strategy to achieve steady-state conditions. The strong influence of the composition of the initial charging in the decanter can be seen and an initial charging of the two-phase top product leads to the fastest startup

Influence des conditions d’alimentation sur l’amélioration des performances et la réduction du frottement dans les paliers

The performance of hydrodynamic journal bearings is significantly affected by the conditions under which the lubricant is fed to the bearing. However, many conventional analyses are not prepared to suitably incorporate these parameters and their effect on bearing performance, due to the over-simplified way they treat them. A thermohydrodynamic analysis suitable for conveniently deal with lubricant feeding conditions is now presented. It couples the numerical solution of the generalized Reynolds equation, the energy equations within the lubricant film and the heat transfer within the bush body. Special attention has been given to the treatment of the phenomena taking place within the grooves and in their vicinity, as well as to the ruptured film region. The effect that lubricant feed pressure and temperature, groove length ratio, groove width ratio and groove number (single / twin) have on bearing performance has been analyzed for a broad range of conditions. The results were found to be in good agreement with experimental published results and the robustness of the model to suitably treat these phenomena has been confirmed. It was found that a careful tuning of the feeding conditions may indeed improve bearing performance.Les performances des paliers lisses hydrodynamiques sont significativement affectées par les conditions dans lesquelles le lubrifiant est introduit dans le palier. Cependant, de nombreuses analyses classiques ne sont pas prêtes à intégrer convenablement ces paramètres et leurs effets sur les performances des paliers, en raison de la façon trop simplifiée avec laquelle ils les traitent. Une analyse thermohydrodynamique appropriée pour traiter convenablement les conditions d'alimentation de lubrifiant est maintenant présenté. Elle intègre la solution numérique simultanée des équations de Reynolds généralisée, de l'énergie dans le film lubrifiant et de la de chaleur dans le coussinet. Une attention particulière a été portée pour le traitement des phénomènes se produisant dans les rainures et dans leur voisinage, ainsi que dans la région de rupture du film. L'influence de la pression et de la température d'alimentation en lubrifiant, de la longueur et largeur de la rainure et du nombre de rainures (simple ou double) sur les performances du palier a été analysée pour un large éventail de conditions. Les résultats numériques obtenus sont en bon accord avec ceux issus de la littérature expérimentale et la robustesse du modèle à traiter convenablement ces phénomènes a pu être confirmée. Il a été constaté qu'un réglage minutieux des conditions d'alimentation peut effectivement améliorer les performances.FCT - POCTI/EME/39202/2001 & Postdoctoral grant SFRH/BPD/89553/201

On the occurrence of negative groove flow rate in twin groove hydrodynamic journal bearings

This paper describes the phenomenon of negative flow rate (hot oil reflux) occurring in one of the grooves of twin axial groove hydrodynamic journal bearings. This rarely described phenomenon, which can occur under severe operating conditions, increases the risk of bearing seizure. Existing codes for predicting bearing behaviour do not seem to be suitably incorporating this phenomenon into the analysis. The present work reports some experimental observations of the phenomenon and the way it can be taken into account in theoretical modelling.FCT - POCTI/39202/EME/2001 & PhD grant SFRH/BD/22278/200

Thermohydrodynamic modelling of journal bearings under varying load angle and negative groove flow rate

The performance of hydrodynamic journal bearings is affected by the conditions under which the lubricant is fed to the bearing gap. Axial grooves are often used and, depending on their location relatively to the load line, they might substantially interfere with the hydrodynamic pressure generation and the thermal behaviour of the bearing. However, many of the existing tools for predicting bearing performance are not able to suitably predict bearing behaviour under varying load angle given the oversimplified way under which they treat lubricant feeding conditions. The present work proposes a detailed Thermohydrodynamic approach which realistically incorporates these conditions into the bearing analysis. Special care is put on the mass and energy-conserving models of the ruptured film region and on a detailed treatment of lubricant mixing within the vicinity of grooves. This includes the first full modelling of the effect of negative flow rate in a groove, a phenomenon originally described experimentally in detail by the authors in previous publications, and which happens for a broad range of load/groove angles. An extensive investigation on the influence of loading direction on the performance of twin groove journal bearings has been performed. This parameter is found to affect deeply all major performance parameters due to the interference of groove regions in the hydrodynamic pressure generation and in the flow rates at each groove.Fundação para a Ciência e a Tecnologia (FCT

SmartTools: a generator of interactive environments tools

SmartTools is a development environment generator that provides a structure editor and semantic tools as main features. The well-known visitor pattern technique is commonly used for designing semantic analysis, it has been automated and extended. SmartTools is easy to use thanks to its graphical user interface designed with the Java Swing APIs. It is built with an open architecture convinient for a partial or total integration of SmartTools in other environments. It makes the addition of new software components in SmartTools easy. As a result of the modular architecture, we built a distributed instance of SmartTools which required minimal effort. Being open to the XML technologies offers all the features of Smart Tools to any language defined with those technologies. But most of all, with its open architecture, SmartTools takes advantage of all the developments made around those technologies, like DOM, through the XML APIs. The fast development of SmartTools (which is a young project, one year old) validates our choices of being open and generic. The main goal of this tool is to provide help and support for designing software development environments for programming languages as well as application languages defined with XML technologies

E-MSD: improving data deposition and structure quality

The Macromolecular Structure Database (MSD) () [H. Boutselakis, D. Dimitropoulos, J. Fillon, A. Golovin, K. Henrick, A. Hussain, J. Ionides, M. John, P. A. Keller, E. Krissinel et al. (2003) E-MSD: the European Bioinformatics Institute Macromolecular Structure Database. Nucleic Acids Res., 31, 458–462.] group is one of the three partners in the worldwide Protein DataBank (wwPDB), the consortium entrusted with the collation, maintenance and distribution of the global repository of macromolecular structure data [H. Berman, K. Henrick and H. Nakamura (2003) Announcing the worldwide Protein Data Bank. Nature Struct. Biol., 10, 980.]. Since its inception, the MSD group has worked with partners around the world to improve the quality of PDB data, through a clean up programme that addresses inconsistencies and inaccuracies in the legacy archive. The improvements in data quality in the legacy archive have been achieved largely through the creation of a unified data archive, in the form of a relational database that stores all of the data in the wwPDB. The three partners are working towards improving the tools and methods for the deposition of new data by the community at large. The implementation of the MSD database, together with the parallel development of improved tools and methodologies for data harvesting, validation and archival, has lead to significant improvements in the quality of data that enters the archive. Through this and related projects in the NMR and EM realms the MSD continues to improve the quality of publicly available structural data

Experimental investigation of the influence of supply temperature and supply pressure on the performance of a two axial groove hydrodynamic journal bearing

An experimental study of the influence of oil supply temperature and supply pressure on the performance of a 100mm plain journal bearing with two axial grooves located at ±90º to the load line was carried out. The hydrodynamic pressure at the mid-plane of the bearing, temperature profiles at the oil-bush and oil-shaft interfaces, bush torque, oil flow rate, and the position of the shaft were measured for variable operating conditions. Shaft rotational speed ranged from 1000 to 4000rpm and two different values of applied load were tested (2kN and 10kN). The supply temperature ranged from 35 to 50ºC, whereas the oil supply pressure range was 70kPa to 210kPa. Bearing performance is strongly dependent on the supply conditions. It was found that the existence of the downstream groove significantly affects the temperature profile at the oil-bush interface except for the low load, low feeding pressure cases, where the cooling effect of the upstream groove is significant. Feeding temperature has a strong effect on the minimum film thickness. The increase in maximum temperature is significantly lower than the corresponding increase in supply temperature. Increases in supply pressure lead to a significant rise in oil flow rate but have little effect on the maximum temperature and power-loss, except in the case of the lightly-loaded bearing. Shaft temperature was found to be close to the bearing maximum temperature for low applied loads, being significantly smaller than this value for high loads. The mean shaft temperature is only significantly higher than the outlet temperature at high shaft speeds

Influence of severe plastic deformation on the precipitation hardening of a FeSiTi steel

The combined strengthening effects of grain refinement and high precipitated volume fraction (~6at.%) on the mechanical properties of FeSiTi alloy subjected to SPD processing prior to aging treatment were investigated by atom probe tomography and scanning transmission electron microscopy. It was shown that the refinement of the microstructure affects the precipitation kinetics and the spatial distribution of the secondary hardening intermetallic phase, which was observed to nucleate heterogeneously on dislocations and sub-grain boundaries. It was revealed that alloys successively subjected to these two strengthening mechanisms exhibit a lower increase in mechanical strength than a simple estimation based on the summation of the two individual strengthening mechanisms